Van Signwriting: Volkswagen Transporter

When it comes to van signage and van signwriting, Perth Graphics Centre prides itself on quick turnaround and high quality workmanship.


This is why Four Seasons Condoms approached Perth Graphics Centre to get its Volkswagen Transporter van signage done. It was needed for the weekend of Stereosonic, and with the artwork signed off, it was time to get underway.


The van was signwritten with a combination of vinyl cut lettering and digital print, but with a minimalist look. It got the message across and the customer was extremely pleased.

If van signage is something you require, head to our contact page to ask for a quote or click here to email us.

Car signs: Nissan Micra

The diminuitive Nissan Micra isn’t usually the first choice for vehicle signage.Yet here at Perth Graphics Centre, we can turn any vehicle into a blank canvas.


Using a combination of vinyl cut lettering and digital printing, plus one-way vision for the rear window, we have created a neat little advertising space for United Family Day Care.


The customer was extremely pleased with the result, and we’re sure that if you need vehicle signage, you will be too.


Call Perth Graphics Centre by heading to our contact page to ask about signwriting your cars.

Car signs and vehicle signage: Preparing your car

When our customers are getting car signs or vehicle signage installed, we are often asked if the car has to be washed first. The answer is a definite “yes”. But there’s more to it than just a quick wipe down.


Let’s run through a few necessities to ensure your job lasts its longest:

  • Paintwork must be in an “as new” condition. Chalky paintwork will prevent your signage from sticking to the surface
  • You must wash the car before bringing it to us. Ensure the vehicle is cleaned with soapy water and well-rinsed. It is important to remove any insect remains, plus road grime
    along the bottom of the body and around the wheel arches.
  • Do not wax or polish your car prior to having your signage or vehicle wrap applied.
  • Ensure car is dry before coming in and there are no water-marks or spots left on the car.
  • All windows that will have graphics on them need to be clean and dry. If you are having a rear window graphic (one-way vision) applied, remove any stickers on the outside of the window as well as any dirt in and
    around the rubbers or seals.

Please note, if the above has not been done, eitherĀ  your graphics will not be able to be applied, or additional charges may apply.

Remember, good preparation helps us to do a great job on your vehicle graphics and will ensure years of life for your signage.