Monthly Archive: September 2011

Banner stands 0

Banner stands

Perth Graphics Centre is currently churning out banner stands like there’s no tomorrow. Due to their high resolution and low cost, these are a perfect piece of display equipment, showcasing anything you want, from business ideas to photographs of your product. The face size of banner stands is 2000mm high by 850mm wide, and the cassette mechanism is constructed from durable aluminium. The banner section is a high-strength polypropylene which allows the face to remain non-curl. We also laminate with a protective coating which gives a matt finish – preventing glare from distracting from your message – and which also...

Complete vehicle wrap 0

Complete vehicle wrap

Here, we are showcasing a complete vinyl wrap, creating a black van wrap from a white van. Using black vinyl as a base – to ensure durability – and working in layers over the top, we’ve been able to transform a white van into the moving billboard you see here. With this vehicle wrap, we used cast vinyl to be able to stretch into the deep recesses and have it hang on for years. Vehicle wraps need time and care, which is what we specialise in at Perth Graphics Centre. If you are considering a vehicle wrap, then give us...

Signwriting of a Hino Truck 0

Signwriting of a Hino Truck

Whether it’s big or small, truck signs are Perth Graphics Centre’s specialty. Seen here, is a Hino truck with long term cast vinyl applied to the sides and back. These vinyls will look fantastic in years to come and hold up to the elements with strength. Whether it’s a Hino, Isuzu, Mack or Kenworth, truck signs made by Perth Graphics Centre will catch the eye and ensure your business is presented in its best light. If you have a truck you’d like signwritten or want fleet signage, Perth Graphics Centre will be pleased to help. Head to our contact page...

Mine site spec reflective striping 1

Mine site spec reflective striping

With mining vehicles requiring high visibility striping, Perth Graphics Centre is happy to announce that we will stripe up your vehicle with 3M reflective striping suitable to mine site use. For just $350 + GST you can get both sides and the back of your dual-cab ute striped up to suit mine site requirements. This is for a 50mm thickness – the most common width of reflective striping. The 3M mine-spec striping is extremely durable and hard-wearing as well as fade resistant. The striping will suit the Toyota Hilux, Nissan Navara, Volkswagen Amarok, Holden Colorado, Ford Ranger and Mazda BT-50....