Here we have fitted signwriting to a Hyundai i30cw, the wagon version of the Hyundai i30. It’s a fairly simple approach, as the customer was on a budget but still wanted to make an impact. Using a dark green on the sides and white vinyl cut lettering on the back window, the signs really stand out and get the message across.

If you need vehicle signage, Perth Graphics Centre is here to help.

These stickers will be going onto hot water tanks and will still be readable in the years to come. We can also overlaminate the stickers with a UV absorbent vinyl which extends the life of the print even further.

We are constantly producing outdoor stickers, so if you need your stickers to last a long time, call Perth Graphics Centre by heading to our contact page and requesting a quote. We are Perth’s premier sticker maker.

Shown here is the most common roll up banner (also called pull up banners) which has two feet which swing out from the base, giving greater stability. It’s great for a cost-effective roll up banner solution and comes with its own carry case. If you have a display or need exhibition signage, then these roll up banners are perfect. As we produce them in-house, we have complete control over the whole process.

If there’s anywhere that has expertise in roll up banners, Perth Graphics Centre is it.

We mostly do signage on new cars, but if a customer requests it, we can also install onto older cars, as you can see here with this Hyundai Elantra signwriting.

The goal was to keep the logo consistent on all Granite West’s vehicles and we’ve achieved this with the customer being extremely happy - as always. If you need car signage, Perth Graphics Centre is your one-stop sign shop.

Whether it’s a full vehicle wrap, or a partial vehicle wrap, Perth Graphics Centre can organise design and installation. The car you see here was a partial wrap, and was chosen in these colours to keep completely in line with existing vehicles.

We colour-matched a specific vinyl and despite it being a non-bubble-free vinyl, our expert installers were able to cover the car with no defects at all.

If you require signage wraps, Perth Graphics Centre would be more than happy to help. Whether it’s one vehicle, or 100 vehicles, we can handle it.

They are an A-frame which takes corflute inserts. The corflute insert sits inside a groove on the inside of the frame and allows the A-frame sign to be changeable. This means it’s perfect for announcement signs, sale signs or other signs where you need to change its message often.

The usual sizes for corflute A-frames are 600mm x 900mm and 900mm x 1200mm. If you would like a corflute A-frame, then please email us or call us for a quote.

Our builder’s signs come in all sizes and can be made from corflute, colourbond, signwhite, aluminium composite or anything else that will stand up to the elements.

A builder’s sign allows you to make use of your space and get your business name out there and seen by all the passers-by. If you would like a quote on a builder’s sign, then head to our contact page and send us an email.

Banner signs are eye-catching but affordable alternatives to the more expensive metal signs, and the beauty is there are no unsightly joins. Also known as sailtrack skins, banner signs are a vinyl banner skin attached using an aluminium extrusion. The skin is then stretched extremely tight, making it as flat as a drum. The result is a large sign for little cost.

If you would like a quote on banner signs, Perth Graphics Centre would be more than happy to help. Head to our contact page today.

Seen above, outgassing is simply letting the solvents “outgas” from the vinyl. During the normal drying phase of the inks most of the solvent evaporates, but some still remains. Outgassing is done by hanging the vinyl vertically, and as the solvents are heavier-than-air, they fall out of the vinyl over time. Perth Graphics Centre outgasses its prints for 72 hours to ensure they are completely solvent-free. This restores the vinyl to its original state and prevents it from curling up at the edges or from lifting over time.

This is particularly critical when following up with the final step - overlaminating. You see, if a print still has solvent in it and then gets overlaminated with a protective film, it will trap the solvents inside and that can cause bubbling or peeling later down the track.

So there you have it: Perth Graphics Centre’s guide to producing the longest lasting stickers possible. These steps are followed meticulously every time we produce stickers that need to last. You can be confident that stickers you purchase from Perth Graphics Centre will stand the test of time.

Building site signs allow a builder to display all relevant information in condensed format and we can show you exactly how to set them up if required. Each building site sign can be personalised, or individualised, or you can have a generic site sign that you can write on with permanent marker to show the lot number, etc.

Because the site signs are made from corflute, they’re light-weight and easy to transport from site to site. They’re also cheap to replace if they get damaged. If you’re a builder and you need builder’s site signs, then head to our contact page and ask for a quote - we’re sure you’ll be impressed.